Lace-up sneakers, which is very diverse, can become a stylish highlight image. It is presented in variations such as straight, star, with loops, bow, hidden, double, «pentagram», the words, around the feet, body, sports.
In order to look stylish in a sports Shoe designed lace-up sneakers, which are extremely diverse. Stringing components by conventional methods, so original, each of them has its own certain charm. It often happens that the scheme is simpler than imagined.
Ways of lacing sneakers
Many stylists pay much attention to such details as the lace-up running shoes, women’s options which are presented in different ways. Laces are often used not only to support the Shoe, but also to create the original image. Every day it becomes more and more popular. The most common ways are the following:
- «tangled trail»;
- lace-up closure with a hidden node;
- «reverse chain»;
- «the grille»;
- option a bow;
Video lacing sneaker
Extremely popular lace-up sneakers, which is recognized as a classic. Video lace in some sources is called «rectangular». In this method, there is no diagonal laces inside. Equipment by means of which it is a classic lace-up sneaker is:
- Cord to extend through the lower holes and get inside the Shoe from both ends.
- One end to raise right up to release through the top hole and thread into the left hole.
- The tips to raise up and release out through one hole, stretching to the other side and pull above.
- Stringing until you run out of holes. The other end should go through the remaining hole at the top.
Lacing sneaker «star»
The technique of «star» refers to the options that presents interesting ways of lacing sneakers. It is perfectly suitable, if you want to be more creative. It is desirable to use a long and thin or flat laces. It is worth saying that this method is not suited to extended wear, as it easily becomes weak and needs regular tightening. Step by step instructions, which creates a lace-up sneaker, versions of the «star» is:
- Start in the middle of the lace, which will be perpendicular to the segment passing through the third top with a pair of holes.
- Skip both the laces from the inside to the bottom pair of eyelets.
- Left side to go diagonally, stretching back down, out of the same blocks from which extends the second segment. To form a likeness of the cross and climb to the hole above.
- Make a perpendicular cut, combining half the product.
- To catch this segment right end of the bottom left blocks he reaches back to the upper left. The left end should go from the top right.
Lace-up sneakers with loops
Stylists offer a variety of ways of lacing sneakers. Technique with loops implies a stronger clamping feet. The heel will protect yourself from slippage. This is a great solution for runners. Manual, which creates a lace-up sneaker, options loops is the following:
- Start the action using the General method, for example, crosswise, or any other. To stay in front of the needle through the last eyelet near the top of the product.
- Take the left tip and pull it through the top left eyelet, it should come out the inner side of the Shoe. Repeat these steps on the right side of the Shoe. Get two loops on both sides.
- Cross the laces and insert the loop from the opposite side. Tighten the laces, drawing the footwear tightly to the foot. It should not cause inconvenience.
- Tie them the usual way.
Lacing sneaker bow
Very elegant lace-up women’s sneakers with a bow, it complements any look. The manual consists of the following:
- Align the tips of the laces. Attach them to each other and cross, forming a knot.
- At each of the knots to make a loop. To join the ring, turn one half turn. To run in the resulting hole.
- Tighten the bow.
Found lace-up sneaker, variants of the bow which are slightly different:
- Standard: fold rings, one to form a loop, then a second, wrapped around the loop, pulling through the hole.
- The «surgeon’s knot»: to make «standard» option, and then extended the tip to wrap once more around the site.
Hidden lace-up sneakers
If you use lace-up sneakers, hidden options, it masks the unnecessary details. From the front of the Shoe will be seen a neat and harmonious lines. Manual, which runs creative lace-up sneaker, the following:
- Insert the tip of the lace into the hole. The other end into the parallel hole.
- Grab the inside of the Shoe a number, and then again insert the lace into the hole.
- Repeat the steps until the holes run out. The faults will remain on the inside.
Double lace-up sneakers
Stylists offer a variety of ideas for lacing sneakers. Extremely looks bright double variation. Step-by-step instruction is as follows:
- Tie a knot in a contrasting laces.
- Place site location in the area of the sock inside the Shoe. One end to pull out, then hold it over the top and remove one tip out. Then lead him through the top and flow down to the opposite hole.
- A further technique of pinching adheres to the principles of direct variation.
Lace-up sneakers with long laces
Common lace-up sneaker with 2 laces of considerable length. Very comfortable lace up shoes in the technique of «spider.» Fixing this will be tight. This technique is ideal for sneakers with six pairs of holes. Instruction, which is executed lacing women’s running shoes, the options with long laces, the following:
- Pull the laces through the bottom hole. Cross the ends and push them into fourth a couple of holes, skipping two.
- Both the tip to drop down into the inner part of the product output through a second pair of holes.
- Repeat the first two steps, crossing the ends and guiding them into fifth a couple of holes. Then lead them through a third lower.
- Cross the ends of the inner part and output through the top holes.
Sneakers with side lacing
Designers offered beautiful options of lace-up sneakers in a sideways design. Fixing strong, it looks impressive. Shoes looks outside the box and practical. The statement is as follows:
- Stretch lace through the bottom holes.
- The right part to pick up on one hole, left – two.
- The right part of the thread in the second hole of the left side and lift on two holes.
- The left part of the third hole to push through the opposite hole and send up.
- To repeat the manipulation, bringing both the laces in the lateral external side of the product.
- The bow tie on the side.
Lacing sneaker «pentagram»
Extraordinary lace-up sneakers 2019 will give the image a twist. To create a pentagram from the laces on the shoes is very simple. The manual consists of the following steps:
- Start in the middle of the lace. It should be perpendicular to the segment passing through the third top with a pair of holes.
- Both the laces to stretch the inner part to the lower holes. From there will go lower, the rays of the figure.
- The left tip to go obliquely, to descend back down out of this same hole, from which comes the second segment of the cord, and form a cross. Climb to the hole above.
- Make a perpendicular cut, which will bring together the sneaker.
- Catch for the right cut the tip, which is from the lower left hole on the underside stretches into the upper left hole.
- Left the tip out from the top right hole.
- To dobesilate lace in any convenient way.
Lace-up sneakers words
Not too practical, but a cool lace-up sneakers words. To achieve this, you need to use a short word, no more than three letters. First drawstring is passed through the second bottom hole, extends on the lower line, and then he was put in the right word. However, this type of lacing would not last long, and the leg will stay in the Shoe loosely.
Lacing sneaker around the foot
There is a very interesting lacing of the sneaker around the foot. Often this was done by people whose laces were so long, I tuck them inside the Shoe was pointless. To wrap the lace around the leg is possible with any type of lacing. Looks interesting this option:
- Skip the lace through the bottom hole and get inside the Shoe from both ends.
- One tip to lift up from the inside out, pulling from the hole and stretching to the other side in the horizontal direction.
- Another tip to stretch aslant into the inside of the Shoe, skipping one hole, and then stretch horizontally into the hole from the other side.
- Continue lacing the product with a diagonally until the lace reaches the top of the hole. The other end to lift his side inside the Shoe on one hole and let out. Tie the laces around the leg.
Body lace-up sneakers
Incredibly interesting solution would be to surround lace-up sneaker with eyelets. It looks very original, especially if you take bright colors. The manual consists of the following steps:
- Insert the end of the lace in the first hole from the bottom. Further holes to thread the laces from the top.
- Reaching with one hand to the end, to do the same thing with the other hand. Lace is in this case inserted into the loops already formed series.
Sporty lace-up sneaker
Athletes are very important proper lacing running shoes or other kinds of professional shoes. For example, runners love the lacing, thanks to which the leg is tightly held in sneakers. Strength athletes prefer the lace, without problems being reduced or Vice versa. It is worth noting that the best sports lacing must be tight, but free. The string should be untied under load.
If the shoes have additional holes above the main number, they should be used. They will give you the opportunity to fix the foot. Often, such shoes are tied crosswise, and then put the right tip into the left hole, then pushes into the hole below, on the same side, forming a loop. The same applies to the other side. Put the loose ends through the opposite loop and tie a double knot.
A simple variant of the lacing:
- Thread the lace from the outside to the inside at the bottom of the loop.
- One part of the thread inside the hole above the diagonal.
- The second part to withdraw the same, but on one hole higher.
- Bred out the tip thread into the hole at the same level inside.
- To lace my shoes to the end.
Options lacing sneakers without bows
Popular lace-up sneaker with no bow. Fixing the feet will not be as tight, but the shoes will be a worthy highlight of any image due to the interesting shapes formed on it:
- Zigzag: you need to cross the laces between them along the entire length, udewa in each hole. Hide the ends under the tongue of the Shoe.
- «Lattice», and in the process of weaving where you twist the laces at a steep angle, and they intertwined with each other. Often use two colors of laces on shoes with six pairs of holes.
- «Hidden node»: threading the lace inside with one hand and inserted in parallel into the hole from the other side. You get a flat line. The following should begin from the hole located at the number below. In this way the netting continues to the end, then return in the opposite direction, inserting the lace into the free holes.